File setup specifications

Your files need to meet specific technical requirements to ensure they print correctly. These apply across all three formats.
Resolution and colour profiles
Export all files at 300dpi in RGB colour profile. While commercial photo book printing typically uses CMYK, our HP Indigo digital print workflow is optimised for RGB input. The printers handle RGB to CMYK conversion using profiles calibrated for each paper stock, producing better colour reproduction than pre-converted CMYK files. Images below 300dpi will appear soft or pixelated.
Page dimensions and safety margins
Your content pages should match the photo book size exactly. Creating an A4 book? Your content pages should measure 210x297mm. Don’t add bleed or crop marks — our system generates these automatically.
Maintain a 10mm safety margin on all sides of every page. This ensures text, logos and important visuals aren’t trimmed during production or lost in the gutter where pages meet the spine. The 10mm margin accounts for slight variations in trimming (typically ±1mm) and how pages curve into the binding.
For layflat books, the safety margin rules differ slightly for content pages. The first right-hand page needs a 10mm margin on the top, bottom and right edge, but not on the left inside edge. For spreads, odd-numbered pages need margins on top, bottom and left outside edge, while even-numbered pages need margins on top, bottom and right outside edge. The inside edges don’t require margins because layflat binding eliminates gutter loss.
File structure and PDF export
Save your complete photo book as a single PDF with the cover and all content pages as single pages, not spreads. Page order also matters. The first page becomes the front cover, the second page becomes the first right-hand content page and the last page becomes the back cover.
Export using PDF/X-4 profile (coated FOGRA 39). Embed all fonts in the PDF. Missing fonts cause text to reflow with default fonts that might not match your design. Flatten any transparencies before export to prevent rendering issues.
Quick setup checklist
- Export at 300dpi in RGB colour profile
- Match your page size to the book size exactly (no bleed or crop marks needed)
- Keep 10mm safety margin on all sides (except inside edges on layflat spreads)
- Save as one PDF — cover and content as single pages, not spreads
- Export as PDF/X-4 (coated FOGRA 39) with all fonts embedded
- Flatten transparencies before export
Layflat photo books: File set up guidelines
Softcover photo books: File set up guidelines
Hardcover photo books: File set up guidelines
How photo album book pages are structured
The way pages are arranged in photo books differs from what many expect, particularly regarding which pages print.
Hardcover and softcover page structure
Your PDF’s first page becomes the front cover. Open the book, and the inside front cover appears blank (white) and cannot be printed. Behind that sits a blank binding sheet (front and back) also white and unprintable. These binding sheets are structurally essential for hardcover and softcover books.
Your PDF’s second page becomes the first content page, appearing on the right when you open the book. Your PDF’s third page becomes the second content page on the left, continuing through the book. Near the end, another blank binding sheet (front and back) appears, followed by the inside back cover (also blank), and finally the back cover as your PDF’s last page.
If you supply a 26-page PDF, you get a book where pages 1 (front cover) and 26 (back cover) print as covers, while pages 2-25 print as the 24 content pages inside. The blank binding sheets and inside covers aren’t included in your page count.
Layflat page structure
Layflat books follow a simpler structure. Your PDF’s first page becomes the front cover. The inside front cover appears blank. Your PDF’s second page becomes the first content page on the right. All pages print in sequence until you reach the penultimate page (the last content page), followed by the blank inside back cover and the back cover.
Creating your spine

The spine requires different approaches depending on how you’re ordering.
Spine design for manual orders
When placing a manual order, you’ll customise the spine directly in the order form. You’ll enter spine text (typically the title, author, or both), select a text colour and choose a background colour. The system calculates spine width automatically based on your page count and paper stock.
Ensure your text remains legible at the small size it appears on the spine. Avoid complex fonts with thin strokes that might fill in during printing.
Spine design for API users
API integration requires you to provide spine artwork separately from cover artwork. Spine dimensions vary based on page count and the fulfilment centre that produces your photo album book.
Query our API to receive exact spine dimensions for your project before creating spine artwork. This ensures your design fits correctly. Avoid placing important design elements too close to the spine edges — allow margin for variation in photo book printing and binding.
Common file preparation mistakes
These are the most frequent problems that delay production or require resubmission.
Odd-numbered page counts
Submitting files with odd page counts is the most common error. Your total page count must be even. The system will reject odd-page-count PDFs. If your content ends on an odd-numbered page, add a blank page to reach an even count.
Insufficient safety margins
Text or important elements placed closer than 10mm to any edge risk being trimmed. This won’t prevent printing, but you’ll receive books with text cut off or images cropped unintentionally. Always check safety margins before export.
Manually adding bleed and crop marks
Our system generates bleed and crop marks automatically. Adding your own causes confusion during processing and may result in marks appearing in the printed book. Simply extend your backgrounds to the page edge and let the system handle the rest.
Designing spreads as single images
For hardcover and softcover books, never create spreads as single images spanning two pages. The binding gutter will hide approximately 6mm of content where pages meet the spine. Design each page independently.
Layflat books eliminate gutter loss, but still save pages separately in your PDF rather than as single spread images.
Using incorrect colour profiles
Submitting CMYK files instead of RGB causes colour shifts. Always work and export in RGB. If your design software defaults to CMYK, manually set the colour space to RGB before starting.
Embedding low-resolution images
Placing 72dpi web images into print layouts creates blurry results. Check every image’s resolution before placing it. If you’re compiling photo books from client-supplied images, establish minimum resolution requirements upfront.